- Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
- Adjustable dynamic anti-skate control
- Professional anti-resonance, die-cast aluminum platter with rubber mat
- AT-HS4 universal "-mount headshell and AT-VM95C Dual Moving Magnet phono cartridge with 0.6 mil conical stylus
- AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
- IN THE BOX: Audio-Technica Fully Manual Belt-Drive Turntable - Dust Cover - Turntable Mat - Drive Belt - Counterweight - AT-HS4 Headshell - AT-VM95C Stereo Cartridge - 45-RPM Adapter - RCA Audio Cable (Approx 1.0m) - AC Adapter (Approx 1.5m) - Dust Cover Hinges
- BUNDLE INCLUDES: Deco Gear Universal 12" Silicone Rubber Turntable Platter Mat | Deco Essentials Vinyl Record Cleaning Fluid System with Dust Brush
Product Features:
Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
Adjustable dynamic anti-skate control
Professional anti-resonance, die-cast aluminum platter with rubber mat
AT-HS4 universal "-mount headshell and AT-VM95C Dual Moving Magnet phono cartridge with 0.6 mil conical stylus
AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
Straight tonearm with hydraulically damped lift control and lockable rest
Anti-resonance MDF (medium density fiberboard) plinth with black wood veneer finish
Built-in switchable phono pre-amplifier for phono or line-level output
AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
Product Specifications:
Type: Belt-drive manual turntable
Motor: DC Servo
Drive Method: Belt drive
Speed: 33-1/3 RPM, 45 RPM
Turntable Platter: Die-cast aluminum
Wow and Flutter: greater than 0.15% WRMS (33 RPM) at 3 kHz
Signal-to-Noise Ratio:>60dB
Output Level Pre-amp PHONO: 4 mV nominal at 1 kHz, 5 cm/sec | Pre-amp LINE: 200 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain: 35 dB nominal, RIAA equalized
Power Supply Requirements: 100-240V AC, 50/60 Hz, 0.5 A Max
Dimensions: 420.0 mm (16.53") W x 340.0 mm (13.38") D x 116.9 mm (4.6") H
Weight: 3.90 kg (8.60 lbs.) without dust cover
Tonearm type: Static balanced straight aluminum pipe tonearm
Effective arm length: 223.6 mm
Overhang: 18.6 mm
Tracking error angle: greater than 2 degrees
Applicable cartridge weight: 12-17 g
Stylus pressure adjustment range: 0-3 g
AC adapter: 12 V, 0.5 A
Replacement Stylus: AT-VMN95C
