OWI AMP-HD2SIC62 3-Source, 6-Inch Integratable Amplified In Ceiling Speaker AMP-HD2SIC6 and 6-Inch Companion SPKR 40 Watts, 2 Each; with Backcans and Tile Bridges; 20 Watts; NFPA72 Ready

The OWI AMP-HD2SIC6 is a 3-source, 6-inch Integratable amplified ceiling speaker. It is the perfect audio partners for projectors, microphones, music and paging applications. By placing the amplifier within inches of the speaker, maximum damping control of the speaker due to low source impedance is achieved. With up to 40 watts of class AB power delivered directly to the speaker, OWI's self-amplified speakers are powerful enough to drive three additional non-amplified speakers

Key Features:
- Set of 3-Input/source amplified ceiling speaker and companion speaker with tile bridges and backcans
- NFPA72 ready with built-in electronic shunt
- Integrates with life safety
- Works with talkback paging
- Built onto the OWI IC6 In-Ceiling Speakers
- UL Listed
- 2 Line Level Input/Sources
- 1 CAT5 Input
- Up to 40 watts of power - right at the speaker

Specifications:
- Input voltage, nominal: (25 watts) 15 volts DC
- Input current, operating (15VDC): 1.45 amperes peak
- Input volt-amperes, peak (15VDC): 22 volt-amperes
- Input voltage, maximum: 16.5 volts, DC
- EQ set to flat: 20Hz to 20 kHz
- Bass: /- 10dB at 50Hz
- Treble: /- 10dB at 10kHz
- THD Noise: less than 1 percent at 13.5 watts, "A" weighted
- S/N: more than 82 dB
- Max Power Output (28V in): 40 watts
- DC Power, Standby: 1.4 watts
- AC Power, Sleep Mode: 1.4 watts
- Minimum Input impedance, Priority in: 10,000 ohms
- Minimum Input impedance, RJ45 in: 150,000 ohms
- Speaker Diameter: 6.5 Inches
- Height of Amplifier/Speaker Assembly: 4.5 inches
- Weight of Amplifier/Speaker Assembly: 3.15 lbs
- Shipping Weight: 18 lbs